| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| 3d-finish on Dickey’s IRW guitar http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=1217 |
Page 1 of 1 |
| Author: | Michael Dale Payne [ Thu Mar 03, 2005 8:25 am ] |
| Post subject: | |
Well I put a .5mm clear film on the virtual guitar worked on the reflection and refraction characteristics. It works!!!!!!  I knew it would, but I had not done it on one before. Check out the reflection of the bridge and pins on the top surface. Sorry for the low res but Bruce will probably post the high res on his sight later.
|
|
| Author: | Dickey [ Thu Mar 03, 2005 11:42 am ] |
| Post subject: | |
Cool Michael. This reminds me of trying to get pics for you. I kept showing up in the nitrocellulose. |
|
| Author: | Dickey [ Sat Mar 05, 2005 5:34 am ] |
| Post subject: | |
So this is one of two final renderings. Thanks Michael for all the hard work. My turn now, nothing like a virtual preview. Wonder how this baby will sound? 
Sorry, just a thumbnail, will go adjust the page and get the other available. bd Link to the Guitar Page on dickey guitars.com |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|